A powerful & heavy-duty VMC that give you the advantage! The ability to machine components normally requiring much larger, more expensive machine tool.
* Heavy Duty 14,000kg Frame Built For Rigidity, Durability And Outstanding High-Performance Machining
* VMC-1688: 1600mm x 800mm x 800mm Travel (X-Y-Z)
* VMC-1888: 1800mm x 800mm x 800mm Travel (X-Y-Z)
* Powerful 30HP Spindle Motor, BT 50/6,000 rpm Spindle, 16 m/min Rapid Speed
* Table Size: 800 x 1800 mm, 3000kg Table Loading
* Heavy-Duty Solid Sixes Box Way Construction
* ISO 50/6000 rpm With ZF Gear Box Available
* Integrated Chip Auger
* Standard Arm Type ATC (24 Tools)
* High speed Arm Type ATC Available (40 Tools)
Rigid Construction
Massive, Meehanite Castings
the bed, column, saddle, table and spindle head are constructed by high quality meehanie castings and each of their parts employed with ample ribs and stress relieved. All slideways are hardened and ground, designed extra wide & Heavy-duty Y-axis 4 slideway construction for extreme sturdiness, the contacting surface coated with turcite-B and hand-scraped to reduce stickslip effect and assist in vibration free machining. The large diameter precision ground Ball screw with preloaded double nuts, and supported by pretensioned angular contact bearing which are located at the center of the slideways and compled directly to the AC servo motor. result in increased response and high rigidity for greater accuracy. |
 |
High Performance Cartidge Spindle
High performance Cartridge spindle consisting with sixes of P4 Angular contact bearing Spindle air purge system, spindle taper air blow out, ISO 50/6000 rpm spindle available. |
 |
Full Range, Quality Assured
Every machine is measured by laser calibrated & ball-bar analysis, and cutting & coolant testing and undergoes a rigorous 50 hours non-stop running before shipment, and all model of machines equipped with automatic metered central lubricated system with low fluid alarm, 24V/70W Halogen work lamp, Coolant system, telescopic steel way covers on X-Y-Z axes and full enclosure guard with door-interlocked are all as standard. |
 |
Specification
VMC- 1688 |
| Travel |
| Spindle Center To Column |
900 mm (35.4") |
| Spindle Nose To Table Top |
150 -950 mm |
| Vertical Travel (Z-Axis) |
800 mm (31.5") |
| Cross Travel (Y-Axis) |
800 mm (31.5") |
| Longitudinal Travel (X-Axis) |
1600 mm (63") |
| Table |
| Max. Table Loading Capacity |
2500 kgs |
| T-Slots (width x No. x Patch) |
22 x 6T x 150 mm |
| Table Size |
800 x 1800 mm |
| Spindle |
| Coolant Thru Spindle (Option) |
Available. Complies with DIN 69871 from B tool holder |
| Spindle Taper (Standard) |
BT# 40 (standard), CT#50 (option) |
| Spindle Speed Range |
40 - 8000 rpm |
| Spindle Motor |
17/22 KW |
| Feed |
| Cutting Feedrate (X-Y-Z) |
1-5000 mm/min |
| Rapid Traverse (Z) |
12 m/ min |
| Rappid Traverse (X-Y) |
15 m/min |
| Feed Motor Torgue (X-Y-Z) |
27 Nm (7.0KW) |
| Accuracy |
| Positioning Repeatability |
± 0.003 mm (± 0.0001") |
| Positioning |
± 0.005 mm (± 0.0002") |
| Automatic Tool Changer |
| No. Of Tools |
20 tools (carousel type standard), 24 or 40 tools arm type. (option) |
| Tool Selection |
By address code, random / bi-directional rotation |
| Pull Stud |
MAS 403-P40T (45°) or PS-CT40 (45°), or DIN 69872 B (45°) |
| Max. Tool Diameter |
Ø 80 mm (carousel type), Ø 76 mm (arm type) |
| Max. Tool Weight |
8 kgs |
| Max. Tool Length |
300 mm (12") |
| Tool change time (tool to tool) |
7 sec for carousel type, ( 2 sec for arm type) |
| General |
| Coolant Pump Motor |
3/4 HP |
| Floor Space (L x W x H) (cm) |
450 x 330 x 300 cm |
| Packing Size For Shipment |
- |
| Power Required |
32 KVA |
| Air Required |
6 kg/cm (85 psi) |
| Machine Weight (Approx) |
14000 kgs |
|
