A powerful & heavy-duty VMC that give you the advantage! The ability to machine components normally requiring much larger, more expensive machine tool.
* 1020 x 650 x 635 mm Travel (X-Y-Z)
* 15 HP High Power Spindle Motor
* Table Size 550 x 1220 mm
* BT40/8,000 rpm Spindle
* Solid Box Way Construction
* Integrated Chip Auger
* Solid Box Way Construction
* Standard Umbrella Type ATC (20 Tools)
* High speed Arm Type ATC Available (24 or 40 Tools)
* SEIMENS 810D w/ShopMill Medals 64S/65S or FANUC 0i B
* Integrated 4th Axis Available
* Compact Design Requires Minimum Floor Space
Rigid Construction
Rigid Construction
The Bed, column, saddle, table and spindle head are constructed by high quality meehanite castings and each of their parts employed with ample ribs and stress relieved. All slideways are hardened and ground, designed extra wide box guideways for extreme sturdiness, the contacting surface coated with turcite-B and hand-scraped to reduce stickslip effect and assist in vibration free machining. The large diameter precision ground ball screw with preloaded double nuts, and supported by pretensioned angular contact bearing which are located at the center of the slideways and compled directly to the AC servo motor. result in increased response and high rigidity for greater accuracy. |
 |
High Performance Cartidge Spindle
High performance Cartridge spindle consisting with sixes of P4 angular contact bearing spindle air purge system, spindle taper air blow out. |
 |
Automatic Tool Changer (ATC)
The armless, tool magazine can be stored 20 tools, and selected bi-directional in random for useing. 24 tools arm-type option is available. A spindle air blast system removes debris and assures clean spindle taper and maximizes tool setting accuracy. |
 |
Specification
VMC - 1066 |
| Travel |
| Spindle Center To Column |
640 mm (25") |
| Spindle Nose To Table Top |
120-720 mm |
| Vertical Travel (Z-Axis) |
600 mm (24") |
| Cross Travel (Y-Axis) |
600 mm (24") |
| Longitudinal Travel (X-Axis) |
1020 mm (40") |
| Table |
| Max. Table Loading Capacity |
800 Kgs |
| T-Slots (Width x No. x Patch) |
18 x 5 x 100 mm |
| Table Size |
600 x 1100 mm |
| Spindle |
| Coolant Thru Spindle (Option) |
Available. Complies with DIN 69871 from B tool holder |
| Spindle Taper (Standard) |
BT#40 (standard),CT#40 or DIN-69871A SK40 (option) |
| Spindle Speed Range |
80 - 8000 rpm (standard), 100 - 10,000 rpm or 2,000 - 18,000 (option) |
| Spindle Motor |
7.5 / 11 KW (standard) 11 / 15 KW (option) |
| Feed |
| Cutting Feedrate (X-Y-Z) |
1 - 5,000 mm/min |
| Rapid Traverse (Z) |
15 m/min |
| Rappid Traverse (X-Y) |
20 m/min |
| Feed Motor Torgue (X-Y-Z) |
12 Nm (3.0KW) |
| Accuracy |
| Positioning Repeatability |
± 0.003 mm (± 0.0001") |
| Positioning |
± 0.005 mm (± 0.0002") |
| Automatic Tool Changer (Carousel Type) |
| No. of Tools |
20 tools (carousel type standard), 24 or 40 tools arm type (option) |
| Tool Selection |
By address code, random / bi-directional rotation |
| Pull Stud |
MAS 403-P40T (45°) or PS-CT40 (45°), or DIN 69872 B (45°) |
| Max. Tool Diameter |
Ø 80 mm (carousel type), Ø 76 mm (arm type) |
| Max. Tool Weight |
8 kgs |
| Max. Tool Length |
300 mm (12") |
| Tool Change Time (Tool To Tool) |
7 sec for carousel type, ( 2 sec for arm type) |
| General |
| Coolant Pump Motor |
3/4 HP |
| Floor Space (L x W x H) (cm) |
310 x 280 x 280 cm |
| Packing Size For Shipment |
230 x 280 x 260 cm |
| Power Required |
25 KVA |
| Air Required |
6 kg/cm (85 psi) |
| Machine Weight (Approx) |
6500 kgs |
|
