KL-2660 / KL-2680
KL-26120 / KL-26160
KL-26200 / KL-26240 |
| Working Capacity |
| Swing Over Bed |
670 mm |
| Center Height To Bed |
335 mm |
| Center Height To Top Cross Slide |
205 mm |
| Swing Over Cross Slide |
400 mm |
| Dis. Between Centers |
1600 mm / 2100 mm / 3100 mm / 4100 mm / 5100 mm / 6000 mm |
| Width of bed |
450 mm |
| Headstock |
| Spindle Nose |
D1-8 * |
A2-11 * |
A2-11 |
A2-15 |
A2-20 |
| Spindle Bore |
85 mm (3.34") |
105 mm (4") |
153 mm (6") option |
230 mm (9") option |
305 mm (12") option |
| 3-Jaw Scroll Chuck (Option) |
Ø10" (thr. hole 76 mm) for D1-8 spindle nose only
Ø 12" 3-jaw scroll chuck (thr. hole 103 mm)
Ø 16" 3-jaw scroll chuck (thr. hole 155 mm)
Ø 20" 3-jaw scroll chuck (thr. hole 160 mm)
Ø 25" 3-jaw scroll chuck (thr. hole 200 mm) |
| Hydraulic Power Chuck (Option) |
Ø 10" (thr. hole 75 mm) for D1-8 spindle nose
Ø 12" (thr. hole 105 mm) for A1-11 spindle nose
Ø 15" (thr. hole 117.5 mm) for A2-11 spindle nose,
Ø 18" (thr. hole 117.5 mm) for A2-11 spindle nose,
Ø 24" (non thr. hole) for A2-15 spindle nose |
| Bar Capacity (Power Chuck) (Option) |
Ø 75 mm for D1-8 of 10" chuck,
Ø 91 mm for A1-11 of Ø 12" chuck,
Ø 117.5 mm for A1-11 of Ø 15" chuck and Ø 18" chuck |
| Range Of Spindle Speeds |
3 rang gears auto shifting |
| Spindle Speeds Range |
H: 2000 - 491 rpm
M: 490 ¡V126 rpm
L: 125 ¡V 25 rpm |
H: 1500 - 331 rpm
M: 330¡V93 rpm
L: 92 - 24 rpm |
H: 800 - 176 rpm
M: 175¡V59 rpm
L: 58 - 12 rpm |
H: 450 - 108 rpm
M: 107 - 31rpm
L: 30 - 6rpm |
H: 350 - 87rpm
M: 86 - 26rpm
L: 25 - 5rpm |
| Taper In Spindle |
MT# 6 |
| Saddle |
| Longitudinal Travel (Z-Axis) |
1300 mm / 1800 mm / 2800mm / 3800 mm / 4800mm / 5800 mm |
| Cross-Slide Travel |
450 mm |
| Size Of Tool Holder |
25 mm |
| Ball Screw (Dia x Pitch) |
X-Axis: Ø25 mm x P5 mm, Z-Axis: Ø50 mm x P10 mm |
| Tailstock |
| Quill Diameter |
Ø 105 mm |
| Quill Travel |
220 mm |
| Quill Taper |
MT #5 |
| Motor |
| Spindle Motor |
20 HP (standard), 30 HP (option) |
| Z-Axis Drive Motor |
12 Nm (FKM 44.3) |
| X-Axis Drive Motor |
6.3 Nm (FKM 42.3) |
| Coolant Pump Motor |
1/4 HP - standard, 3/4 HP (option) |
| High Pressure Coolant |
1-1/2 HP (option for U drills) 6 bar |
| X, Z- Axes Feed |
| X Axis Rapid Travel |
6 M/min |
| Z Axis Rapid Travel |
8 M/min |
| General |
| Power Required |
20 KVA |
| Floor Space (L x M x H) |
3590/4090/5090/6090/7090 x 1950 x 1820 mm |
| Approx, Machine Weight |
4200kgs / 4700kgs / 5700kgs / 6800kgs / 7800kgs / 8800kgs |
