A combination of a high precision manual lathe plus a lathe with digital readout, powerfeed and JOG modes, teach modes for CNC and CNC capability
* 610 mm (24") Swing, 1000mm,1500mm & 2000mm Center Distance
* D1-8- Ø85mm Spindle Bore. A2-11-Ø105 mm Available
* 15 HP, 3-Geared Range Programmable Speeds Up To 2000 RPM
* Ø250 Mm Dia. 3-Jaw Scroll Chuck As Standard
* Rugged Cast Iron Construction
* Turicte-B Coated On Sliding Ways For Smooth Movement
* Hand-Scraped For All Mating Sliding Surfaces And Gibes
* Ground Ball-Screw W/Double Nuts And Double Anchored
* Powerful AC Vector Spindle Drives, Constant Surface Speed Cutting
* Auto Shifting For Fully Programmable Spindle Speeds
* The Oil Lubrication Regulator For Headstock Heat Emission
* Manual Tail-Stock With Safety Switch
* AC Servo Axes Motors And Drives For High Performance
* Dual Electronic Hand Wheels Allow For Manual Operation
* FAGOR 8055TC or Anilam 4200T Teach Control: easy & intuitive operation
* Automatic Lubrication To All Ssliding Surfaces And Ball-Screws
* Flood Coolant System And Halogen Work Light
* Spindle Load Meter And Cycle Stop Light Indicator
* Fully Enclosed Guarding With Interlocked CE Standard
* Inspected By Laser Calibrated
Rigid Construction
Specification
KL-2400 Series |
| |
KL-2440 |
KL-2460 |
KL-2480 |
| Capacity |
| Height of Centers |
315 mm (12.2") |
| Swing Over Bed |
630 mm (24.8") |
| Swing Over Cross Slide |
400 mm (15.7") |
| Distance Between Center |
1000 mm |
1500 mm |
2000 mm |
| Width Of Bed |
350 mm (14") |
| Saddle |
| Longitudinal Travel (Z) |
750 mm |
1250 mm |
1750 mm |
| Cross slide Travel (X) |
310 mm (12") |
| Headstock |
| Spindle Nose |
ISO D1-8, ISO D1-11 (optional) |
| Spindle Bored (Standard) |
Ø 85 mm (3-1/8") |
| Spindle Bored (Optional) |
Ø 105 mm (4") or Ø 155 mm (6") |
| Taper Of S/Nose & Center |
MT No.7 x No.5 |
| 3-Jaw Scroll Chuck (Option) |
Ø 250 mm for D1-8, Ø 300 mm for D1-11 |
| Hydraulic Power Chuck (Option) |
Ø 250 mm for D1-8, Ø 300 mm for D1-11 |
| Bar Capacity (Power chuck) |
Ø 45 mm for D1-6 of 8" chuck, Ø 75 mm for D1-8 of 10" chuck, Ø 91 mm for A1-11 of Ø12" chuck |
| Range Of Spindle Speeds |
3 Rang Gears Auto Shifting |
| Spindle Speed (Variable) |
D1-11 - H: 1500 - 331 rpm, M: 330 - 93rpm, L: 92 - 20 rpm |
| Indexing Turret (Optional) |
| Turret Tool Station |
8 station |
| Standard O.D. Tool Size |
25 mm (1") |
| I.D. Tool Size (Max.) |
25 mm (1") |
| Tailstock |
| Tailstock Quill Travel |
180 mm (7.08") |
| Tailstock Quill Diameter |
75 mm (3") |
| Tailstock Quill Taper |
No.5 MT |
| Motor |
| Spindle Drive Motor (AC) |
15 HP: Std. (20 HP: optional) |
| Feed Motor Torque (Z-X) |
12 Nm (Z) / 6 Nm (X) Nm |
| Coolant Pump |
1/8 HP, (1/4 HP: up to 2000 mm center distance) |
| Rapid Traverse (Z-X) |
8,000 mm/min (315 ips) |
| Cutting Federate (Z-X) |
1-4000 mm/min (0-157 ips) |
| Accuracy |
| Positioning |
± 0.010/300 mm (± 0.0004/12") |
| Positioning Repeatability |
± 0.005/300 mm (± 0.0002/12") |
| Power Required |
20 KVA |
| Approx. Machine Weight (kg) |
2750 |
2950 |
3250 |
|
