Combination of manual, Teach and full CNC operation for CNC beginners and experts. No CNC skills requiring
* 460 mm (18") Swing, 1000mm or 1500mm Center Distance
* Large D1-6 Ø 55mm Spindle Bore
* 7.5 HP, 3-Geared Range Programmable Speeds Up To 25-2500 RPM
* Ø200 Mm Dia. 3-Jaw Scroll Chuck As Standard
* Rugged Cast Iron Construction
* Turicte-B Coated On Sliding Ways For Smooth Movement
* Hand-Scraped For All Mating Sliding Surfaces And Gibes
* Ground Ball-Screw W/Double Nuts And Double Anchored
* Powerful AC Vector Spindle Drives, Constant Surface Speed Cutting
* Auto Shifting For Fully Programmable Spindle Speeds
* The Oil Lubrication Regulator For Headstock Heat Emission
* Manual Tail-Stock With Safety Switch
* AC Servo Axes Motors And Drives For High Performance
* Dual Electronic Hand Wheels Allow For Manual Operation
* FAGOR 8055TC or Anilam 4200T Teach Control: easy & intuitive operation
* Automatic Lubrication To All Ssliding Surfaces And Ball-Screws
* Flood Coolant System And Halogen Work Light
* Spindle Load Meter And Cycle Stop Light Indicator
* Fully Enclosed Guarding With Interlocked CE Standard
* Inspected By Laser Calibrated
Rigid Construction
Specification
KL-1800 Series |
| |
KL-1840 |
KL-1860 |
| Capacity |
| Height of Centers |
230 mm (9") |
| Swing Over Bed |
460 mm (18") |
| Swing Over Cross Slide |
220 mm (10") |
| Distance Between Center |
1000 mm |
1500 mm |
| Width Of Bed |
350 mm (14") |
| Saddle |
| Longitudinal Travel (Z) |
750 mm |
1250 mm |
| Cross slide Travel (X) |
230 mm |
| Headstock |
| Spindle Nose |
D1-6 (Standard) |
| Spindle Bored (Standard) |
Ø 55 mm (2-1/8") |
| Spindle Bored (Optional) |
- |
| Taper Of S/Nose & Center |
MT No.6 x No.4 for D1-6, MT No.7 x No.5 for D1-8 |
| 3-Jaw Scroll Chuck (Option) |
Ø 200 mm (8") for D1-6, Ø 250 mm (10") for D1-8 |
| Hydraulic Power Chuck (Option) |
Ø 200 mm (8") for D1-6, Ø 250 mm (10") for D1-8 |
| Bar Capacity (Power chuck) |
Ø 45 mm for D1-6 of 8" chuck, Ø 75 mm for D1-8 of 10" chuck, Ø 91 mm for A1-11 of Ø12" chuck |
| Range Of Spindle Speeds |
3 Rang Gears Auto Shifting |
| Spindle Speed (Variable) |
D1-6 - H: 3000-660 rpm, M: 659-146 rpm, L: 145 - 33 rpm |
| Indexing Turret (Optional) |
| Turret Tool Station |
8 station |
| Standard O.D. Tool Size |
20 mm (3/4") |
| I.D. Tool Size (Max.) |
20 mm (3/4") |
| Tailstock |
| Tailstock Quill Travel |
180 mm (7.08") |
| Tailstock Quill Diameter |
75 mm (3") |
| Tailstock Quill Taper |
No.4 MT |
| Motor |
| Spindle Drive Motor (AC) |
7.5 HP |
| Feed Motor Torque (Z-X) |
12 Nm (Z) / 6 Nm (X) Nm |
| Coolant Pump |
1/8 HP, (1/4 HP: up to 2000 mm center distance) |
| Rapid Traverse (Z-X) |
8,000 mm/min (315 ips) |
| Cutting Federate (Z-X) |
1-4000 mm/min (0-157 ips) |
| Accuracy |
| Positioning |
± 0.010/300 mm (± 0.0004/12") |
| Positioning Repeatability |
± 0.005/300 mm (± 0.0002/12") |
| Power Required |
16 KVA |
| Approx. Machine Weight (kg) |
2300 |
2500 |
|
