Combination of manual, Teach and full CNC operation for CNC beginners and experts. No CNC skills requiring
* 410 mm (16") Swing, 1000 mm (40") Center Distance
* Large Ø54mm Spindle Bore
* 7.5 HP, 3-Geared Head Variable Speeds 25-2500 Rpm
* Ø200 Mm Dia. 3-Jaw Scroll Chuck As Standard
* Rugged Cast Iron Construction
* Turicte-B Coated On Sliding Ways For Smooth Movement
* Hand-Scraped For All Mating Sliding Surfaces And Gibes
* Ground Ball-Screw W/Double Nuts And Double Anchored
* Powerful AC Vector Spindle Drives, Constant Surface Speed Cutting
* Auto Shifting For Fully Programmable Spindle Speeds
* The Oil Lubrication Regulator For Headstock Heat Emission
* Manual Tail-Stock With Safety Switch
* AC Servo Axes Motors And Drives For High Performance
* Dual Electronic Hand Wheels Allow For Manual Operation
* Flood Coolant System And Halogen Work Light
* Spindle Load Meter And Cycle Stop Light Indicator
* Fully Enclosed Guarding With Interlocked CE Standard
* Inspected By Laser Calibrated
Rigid Construction
Specification
KL-1640 |
| Capacity |
| Height Of Centers |
200 mm |
| Swing Over Bed |
400 mm |
| Swing Over Cross Slide |
200 mm |
| Distance Between Center |
1000 mm |
| Width Of Bed |
300 mm |
| Saddle |
| Longitudinal Travel (Z) |
750 mm |
| Cross Slide Travel (X) |
210 mm |
| Headstock |
| Spindle Nose |
D1-6 (Standard) |
| Spindle Bored (Standard) |
Ø 55 mm (2-1/8") |
| Spindle Bored (Optional) |
- |
| Taper Of S/Nose & Center |
MT No.6 x No.4 for D1-6, MT No.7 x No.5 for D1-8 |
| 3-Jaw Scroll Chuck (Option) |
Ø 200 mm (8") for D1-6, Ø 250 mm (10") for D1-8 |
| Hydraulic Power chuck (Option) |
Ø 200 mm (8") for D1-6, Ø 250 mm (10") for D1-8 |
| Bar Capacity (Power Chuck) |
Ø 45 mm for D1-6 of 8" chuck, Ø 75 mm for D1-8 of 10" chuck, Ø 91 mm for A1-11 of Ø12" chuck |
| Range Of Spindle Speeds |
2 Gears |
| Spindle Speed (Variable) |
D1-6 - H: 3000-436, L: 435 - 60 |
| Indexing Turret (Optional) |
| Turret Tool Station |
8 Station |
| Standard O.D. Tool Size |
20 mm (3/4") |
| I.D. Tool Size (Max.) |
20 mm (3/4") |
| Tailstock |
| Tailstock Quill Travel |
160 mm |
| Tailstock Quill Diameter |
52 mm |
| Tailstock Quill Taper |
No.4 MT |
| Motor |
| Spindle Drive Motor (AC) |
7.5 HP |
| Feed Motor Torque (Z-X) |
12 Nm (Z) / 6 Nm (X) Nm |
| Coolant Pump |
1/8 HP, (1/4 HP: up to 2000 mm center distance) |
| Rapid Traverse (Z-X) |
8,000 mm/min (315 ips) |
| Cutting Federate (Z-X) |
1-4000 mm/min (0-157 ips) |
| Accuracy |
| Positioning |
± 0.010/300 mm (± 0.0004/12") |
| Positioning Repeatability |
± 0.005/300 mm (± 0.0002/12") |
| Power Required |
16 KVA |
| Approx. Machine Weight (kg) |
2000 |
|
